| |
 Specifications
for Udor Kappa-75 Pumps
FEATURES:
- Medium pressure, 3 cylinder diaphragm pump.
- Excellent for horticultural, lawn care, nursery, agricultural and turf spraying
applications.
- Also effective for other applications, such as, fire-fighting, hydrostatic
testing and cleaning.
- Simplicity of design and common parts allow easy and affordable maintenance.
CONSTRUCTION:
- Built-in pulsation dampener, control valve and pressure gauge are standard.
- Anodized aluminum body.
- Has anodized aluminum and stainless steel liquid handling parts.
- Dimensions are: L = 12", W = 14", and H = 11.2".
OPTIONS:
- Diaphragm materials are Desmopan standard with Buna-N as optional.
- Drive options available are:
| 5029.96 Gear Reduction for 10 and 11 HP |
| 5033.A4 Gear Reduction for 8, 9 and 11 HP |
| 7752.A2 1 3/8", six spline, female PTO adapter, bolts
torque arm, chains and safety shield |
| 7751.A3 1" solid, keyed, shaft base and bolts |
7753.A6 1 3/8", six spline, male PTO shaft
NOTE: Please order part #1219.02 safety shield for this application. |
TORQUE SPECS:
| Diaphragm Bolt with "Blue" Loctite |
18 ft. pounds |
| Head Bolts |
28 ft. pounds |
| Pulsation Dampener |
28 ft. pounds |
PERFORMANCE ANALYSIS:
| RPM |
50 PSI |
150 PSI |
250 PSI |
350 PSI |
450 PSI |
560 PSI |
| US GPM |
HP |
US GPM |
HP |
US GPM |
HP |
US GPM |
HP |
US GPM |
HP |
US GPM |
HP |
| 350 |
11.63 |
1.48 |
11.42 |
2.42 |
11.24 |
3.28 |
11.13 |
3.66 |
10.94 |
4.22 |
10.56 |
5.70 |
| 450 |
15.53 |
1.75 |
15.32 |
3.20 |
15.14 |
4.40 |
15.02 |
4.90 |
14.80 |
5.80 |
14.80 |
7.82 |
| 550 |
19.43 |
2.18 |
19.22 |
3.75 |
18.91 |
5.30 |
18.66 |
6.04 |
18.46 |
7.02 |
18.46 |
9.80 |
Test Conditions:
Water temperature = 70º, Hose 1 1/4" Internal Diameter and Suction
Lift was 2 feet. Any variation in these conditions may change pump
performance. |
LUBRICATION REQUIREMENTS:
30 ounces of SAE 40W, Non-detergent Oil.
HYDRAULIC REQUIREMENTS:
Hydraulic flow = 14 GPM.
Hydraulic PSI = 1200 PSI.
|
