|
| Banjo 1 1/2 and 2 inch Gas or Electric Driven Cast Iron C Flange or Pedestal Pumps |
|
- This pump features durable cast iron construction with dynamically balanced impeller. It has replaceable inlet and outlet flanges and carbon ceramic seals with stainless steel cup and spring and FKM (viton type) rubber seals.
- The pump has a stainless steel sleeve to protect engine shaft.
- 2 HP motors can ONLY be used at 1750 RPM.
- Banjo pumps WILL NOT self prime if a 1750 RPM motor is used.
- Recommended horsepower listed below is for water only. Heavier fluids may require additional horsepower or a trimmed impeller.
- Pump only packs are complete and ready for attachment to a gasoline engine.
- With the addition of a bearing pedestal, the pump is easily adaptable to an electric motor.
- Made in the USA with a limited warranty.
- Engine warranty service available at authorized service centers.
|
Warning: Do dot run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump. Also, pump should not be used on flammable materials.
|
|
|
| Product # |
Description |
Price |
|
| 150POICD5/8 |
1 1/2" pump w/ 5/8" shaft sleeve.
RECOMMEND: 3 HP, 3,450 RPM 56C frame size engine. |
$350.71 |
|
| 150POICF7/8 |
1 1/2" Cast Iron pump, C flanged, w/ 7/8" shaft sleeve.
RECOMMEND: 3 HP, 3,450 RPM 145TC frame size engine. |
$358.19 |
|
| 200POICF5/8 |
2" Cast Iron pump, C flanged, w/ 5/8" shaft sleeve.
RECOMMEND: 3 HP, 3,450 RPM 56C frame size engine. |
$358.19 |
|
| 200POICF7/8 |
2" Cast Iron pump, C flanged, w/ 7/8" shaft sleeve.
RECOMMEND: 3 HP, 3,450 RPM 145TC frame size engine. |
$358.19 |
|
| 150PBI |
1 1/2" Cast Iron pump w/ bearing pedestal |
$441.24 |
|
| 200PBI |
2" Cast Iron pump w/ bearing pedestal |
$441.24 |
|
|
|
|
|
|
