|
| Banjo 222 Series Engine Driven Pumps |
|
This efficient new design from Banjo provides for high flows at higher pressure!
- Pumps feature durable cast iron construction with dynamically balanced impeller. It has replaceable inlet and outlet flanges and carbon ceramic seals with stainless steel cup and spring and FKM (viton type) rubber seals.
- The pump end is separated from the engine has a heavy duty slinger seal on the motor shaft and large weep holes between the pump end and engine for maximum engine protection.
- The pump is V shaped for quick priming.
- The Briggs & Stratton 5.5 Intek motor features an aluminum cylinder, heavy duty flywheel, overhead valve, dual oil fill/drain, 3.0 quart (2.85 liter) molded fuel tank, low tone muffler and a breather thru air cleaner.
- The Briggs & Stratton Vanguard motor features twin cylinders with cast iron sleeves, PTO ball bearings, oval oil drain, pressured lubrication system and 12 volt electric starter.
- The Honda GX series motor features commercial grade legendary reliability and durability, powerful overhead valve, oil alert, quiet, easy starting, industrial 2 stage air filter and 2 year warranty.
- Made in the USA with a limited warranty.
- Engine warranty service available at authorized service centers.
|
Product shown is 222PI5. Please view individual part photos for other models.
Click here for technical flow info.
|
|
|
| Product # |
Description |
Price |
|
| 222PI5
|
2" Cast Iron pump w/ 5.5 HP Briggs & Stratton Intek engine. |
$645.66 |
|
| 222PI5V
|
2" Cast Iron pump w/ 5.5 HP Briggs & Stratton Intek engine and FKM seals. |
$713.85 |
|
| 222PI16PRO |
2" Cast Iron pump w/ 6.5 HP Briggs & Stratton Intek Pro Series engine. |
$732.80 |
|
| 222PI16VAN |
2" Cast Iron pump w/ 6.5 HP Briggs & Sratton Vanguard engine. |
$1091.19 |
|
| 222PIH5
|
2" Cast Iron pump w/ 5.5 HP Honda GX160 series engine.
Recommended for use with 10 pound (or more) per gallon material. |
$1037.60 |
|
| 222PIH5V
|
2" Cast Iron pump w/ 5.5 HP Honda GX160 Series engine and FKM seals.
Recommended for use with 10 pound (or more) per gallon material. |
$1109.85 |
|
| 222PIH5E |
2" Cast Iron pump w/ 5.5 HP Honda GX160 series engine with Electric Start.
Recommended for use with 10 pound (or more) per gallon material. |
$1389.37 |
|
| 222PIH6 |
2" Cast Iron pump with 6.5 HP Honda GX200 engine. |
$1114.63 |
|
| 222PBI
|
2" Cast Iron pump on bearing pedestal with 3/4" straight keyed shaft and EPDM seals.
Recommended for use with 5 HP electric motor @ 3,600 RPM. |
$462.01 |
|
| 222PBIV
|
2" Cast Iron pump on bearing pedestal with 3/4" straight keyed shaft and FKM seals.
Recommended for use with 5 HP electric motor @ 3,600 RPM. |
$519.11 |
|
| 222POI |
2" Cast Iron pump ONLY with full impeller and EPDM seals.
Recommended for use with 10 pound (or more) per gallon material. |
$323.15 |
|
| 225POI |
2" Cast Iron pump ONLY with trimmed impeller and EPDM seal.
Recommended for use with 10 pound (or more) per gallon material. |
$323.81 |
|
| 222PIHY |
2" Hydraulic driven Cast Iron pump with EPDM seals. |
$977.17 |
|
|
|
|
|
|
