• The original high-pressure TurboDrop® is best for penetration into a dense crop canopy.

• At lower pressures, the spray angle of the exit tip will narrow by approximately 10-15% (making a 110° degree tip essentially a 90-100° tip). Make necessary boom heighth adjustment for desired overlap. (For 20" spacing, a height of 20"-36" is recommended.)



Low Pressure TurboDrop® XL VENTURI:
• The venturi must be correctly matched to the exit tip. The venturi controls the flow rate; the exit tip determines the pattern only.

• Extended range, turbo flat fan, flood tips and others may be used with the XL venturi. Simply choose a tip with double the flow rate of the venturi. *Some exit tips may not be capable of these minimum operating pressures. (Please consult Greenleaf Technologies.)

• Always test any combination that you intend to use.